How To Thread A Brother Sewing Machine

Pass the thread across the top of the machine to the slot at the far left side. Load the spool of thread. But we dont want you to be so and thus have decorated todays article with the simplest method of threading a brother sewing machine.

how to thread a brother sewing machine

Perfect Brothers Sewing Machine Tutorial K96140 Image Titled Thread

That Jolie Girl Sew Happy

How To Thread And Properly Insert A Bobbin Brother Jx2517

Place a spool of thread on the spool holder on the top of the machine.

How to thread a brother sewing machine.

Draw the thread through the bobbin hole.
Raise the presser foot using the presser foot lever.
Sit the bobbin on the bobbin winding shaft.
With a little practice youll be able to thread like a pro.

How to thread a brother ls 2125i sewing machine place the spool on the spool pin.
Pass the tail end of the thread through the top hole.
Hook the thread into the final.
Setting up a brother sewing machine includes a number of different processes.

The bobbin on a brother sewing machine is threaded by winding an empty bobbin on top of the machine.
Pass the end of the thread through the presser foot and then pull out about 5 cm 2 inches of thread toward the rear of the machine.
Wrap the thread around the thread tension discs.
Raise the needle by turning the hand wheel toward you counterclockwise so that the mark on the wheel points up.

Tie the thread behind the thread holder above the needle pass the thread from the front to the back through the needle.
How to thread a brother ls 1217 sewing machine threading the needle raise the thread take up lever.
Follow these steps to thread the machine.
If the presser foot is not raised the sewing machine cannot be threaded correctly.

When in doubt pull the thread out and start again.
Guide the thread around the take up lever.
Pull the spool pin up so that it is completely vertical.
Start here by learning how to properly thread your sewing machine.

Turn on the sewing machine.
Among those threading is the toughest one which can make you depressed if you cannot deal with it properly.
Press the foot.
Bring the thread down the connected vertical slot on the front of the machine and back up the parallel slot 12 inch to the left of the first slot.

1 5 cm 2 inches make sure you raise the presser foot lever and the thread take up lever before you feed the upper thread.
Draw the thread into the right channel.

Threading The Machine Winding The Bobbin Caution Brother Lx2375