How To Refill A Lighter

If you turn the lighter upside down you will see a small circular indent on the bottom. Press down on the lighter firmly for about five seconds to refill the lighter. Once all pressure is released refill and you should be good to go.

how to refill a lighter

Amazon Com 5pack Angle Eagle Jet Flame Butane Torch Lighter

Refill Bic Lighter No Tacks No Holes No Valve Just Like New

Clipper Lighter Refill Valve 420 Magazine

Do this outdoors for safety.

How to refill a lighter.

Press firmly and maintain pressure until the hissing stops.
Place a pushpin in the hole and then place the base of the pin on a hard surface like a table.
Fill the lighter for about five seconds.
For those wondering why they cant refill their butane lighters its because you must first find a small solid tool to press against the valve on the lighter to release it of pressure.

Push the refilling valve with a screwdriver to let out.
Hold the lighter tight.
After ascertaining that it has some butane in it secure the refill bottle on the refill valve of your butane lighter.
After purging the chamber turn the lighter upside down so the refill port is facing the ceiling.

After filling if you feel like your lighter isnt full repeat this procedure for another five seconds.
Drain all existing fuel from the lighter using a pen small screwdriver or some other small pointed object by depressing the fuel refill nozzle photo 2.
The bottom of the lighter should pop out.
Do not refill your lighter immediately after using it.

Turn it right side up and push it down on a hard surface such as a counter top or table.
First locate the refill nozzle and flame adjustment screw photo 1.
To refill your lighter please read and use the following instructions carefully.
Pressing the lighter down onto the bottle will disengage the release valve on the bottles nozzle.

Refilling your torch lighter.
When topping off be certain that you are going to make a solid connection.
Make sure that the tip forms a perfect fit with the valve.
If the lighter slips while youre filling it it will spray butane out and could very easily ignite.

A simple way to refill an empty lighter.
This is the lighter valve which needs to opened with a pushpin for you to refill the lighter.
Insert the pushpin or tack into the lighter valve a small circular indentation at the bottom of the lighter.
If it does not utilize a tip adapter.

The flame height adjuster on the bottom of the lighter should be set to minimum by turning.
Hold the refill can at a 90 degree upside down angle as you perform the butane lighter refill.
Insert a pushpin into the valve at the bottom of the lighter.
Insert the nozzle of the refill canister into the refill port its an exact fit and orient the canister to be exactly parallel to the torch body.

Careful with this step because some fluid may be left in the lighter and run out once it is opened.